1. What is a Cable Making Machine?

A cable making machine also called cable production machine is used to mass-produce cables by drawing copper or aluminum wire through dies. The generally accepted standard size of the die opening for such machines is 0.002 inch (0.05 mm). However, many small wires with an extremely narrow range of diameters can be drawn using this same standard die while still maintaining nearly 100% yield.

The output speed of the machine while drawing varies from line to line and product to product and may vary widely depending on whether one strand (mono) or multiple strands (multistrand) are being drawn at the same time. Maximum speeds usually average 5-10 feet/seconds. As the drawing process is continuous, some manufacturers will maintain a full production line of dies through which one roll of copper or aluminum wire is drawn. This practice results in the availability of many different sizes of finished wires on an ongoing basis.

2. Types of Cable Making Machine.

Cable making machines are used to produce cable, which is an electrical cable with multiple conductors of power supply.The cable can be made from one cable or cable assembly of more than one cable. Cable manufacturing involves making cable, splicing cable, stripping cable, and terminating cable. Cable production includes the following processes: cable extrusion machine, Rigid stranding machine, Stranding machine, Insulated wire braiding machine for sale.

The first stage in the manufacture of cable usually involves preparing a set of wires by straightening their lengths on a wire straightener. This first strip of wire is then passed through a series of machines called “stranders”, where it is cut into equal lengths and stripped of its insulation. These strips are hanging in a cable drum. At this stage, the cable is made up of separate strands wound together to form the cable. The cable is typically composed of smaller individual conductors or bundles of insulated conductors.

A cable may be connected using crimping and wire fastening techniques which operate similarly but the two techniques are not usually combined within a single cable installation.

3. The benefits of cable making machines.

Recently cable manufacturing machines have become more popular. But, what are cable production machines used for?

Cable making machines are mainly used to create cable assemblies, which are found everywhere in daily life, from the car to the phone. Cable manufacturing equipment, cable manufacturing machine, electric cable making machine price can also be used to make wire harnesses and electrical wires, but cable assemblies are by far the most popular application. Cables find their way into nearly every device, appliance or electronic gadget that people use everyday. This is why cable assembly companies continue growing at a substantial rate each year all over the world.

Do you need quality cable assemblies? If so check out our list of cable assembly manufacturers below:

If you’re already on your way to cable assembly success, I would recommend using cable making machines instead of cable assemblies. Cable making machines are a great way to make cable assemblies at a fraction of the cost and time it takes to make them by hand.

Cable-making machines can be found online on eBay or from cable manufacturers all over the world. While cable manufacturers sell cable making machines, they also offer cable manufacturing equipment , cable manufacturing machine , electric cable making machine price as well as custom cable assemblies for just about any application imaginable. Visit their website today to place an order for quality cable manufacturing equipment, cable manufacturing machine , electric cable making machine price or visit our site to look into purchasing a custom-made cable assembly today!

The benefits of using a cable making machine, cable assembly manufacturer, cable manufacturing machine, cable making equipment include:

– No need to hire cable makers.

– Cable assemblies are faster and cheaper to make in a cable-making machine.

– Get a better cable assembly.

4. where to buy a cable-making machine?

cable wire making is an important thread in numerous industries throughout the world. With wire being used on a daily basis for power, wire and wire production has been an industry of interest for decades. As wire comes in countless shapes, sizes and types, finding the right machine that fits the needs of wire and wire manufacturers has never been more important.

A wire making machine is a very sophisticated piece of machinery that can take years to design and perfect. Reliable Wire and cable makers have a significant amount of engineering work in order to produce wire machines that are dependable high-performance machines, especially when it comes to the wire making market.

Cable wire and wire making machines vary in size, type, quality, and price. With wire being used for everything from power cables to fiber optic wire it is essential that wire manufacturers are able to produce the correct type of wire at a high level of efficiency.

At Wire Machinery our mission is to provide reliable machinery for wire manufacturing companies, wire fabricators, wire makers and wire industry professionals. We offer wire braiding machines, wire drawing machines, wire coating machines, wire cutting machines, and more!

We also offer wire making machine training at our facilities in Zhengzhou China. If you are interested please contact us today for more information on wire machinery or wire technology. Our customer service department is available 24 hours